Created by Royc30ne. Thanks to Demipoet's initial version.
Last updated version: 1.4.5 (Sunset) 2024/3/6#
Project website: Quilibrium
Project introduction: Quilibrium is a decentralized internet layer protocol that provides the comfort of cloud computing without sacrificing privacy or scalability. Transitioning to NoCloud may be easier than you think with a familiar API-compatible SDK.
Minimum configuration requirements for node operation#
During the Dawn phase, the server must have at least 16GB of memory (preferably 32GB), 250GB of storage space (preferably solid-state drive), and 50MBps symmetrical bandwidth. For Intel/AMD, the benchmark processor is a Skylake processor with a clock speed of 3.4GHz and 12 dedicated cores. For ARM, you can refer to Apple's M1 series.
Install dependencies#
Update apt source#
sudo apt upgrade
sudo apt update
Install Git#
sudo apt install git
Install GO#
The current version (as of 1.2.14) does not support project building using go1.21.x or go1.19.x, and go1.20.x must be used. Installation packages for different versions of go can be found on this page: https://go.dev/dl/
Here is an example using 1.20.14
Download the distribution package
wget https://go.dev/dl/go1.20.14.linux-amd64.tar.gz
Unzip the file
sudo tar -xvf go1.20.14.linux-amd64.tar.gz
Move to the usr directory
sudo mv go /usr/local
Delete the installation package
sudo rm go1.20.14.linux-amd64.tar.gz
Add go to the system environment variables
sudo vim ~/.bashrc
Press i to start inserting text in the ~/.bashrc file
Scroll to the end of the file and insert the following content on a new line at the end:
GOROOT=/usr/local/go
GOPATH=$HOME/go
PATH=$GOPATH/bin:$GOROOT/bin:$PATH
Press esc to stop inserting text, enter :wq, and then press the enter key on the keyboard.
Run
source ~/.bashrc
go version
The terminal will return
go version go1.20.14 linux/amd64
Configure Linux network device settings#
Purpose: Optimize throughput (bandwidth) and latency for typical large-scale parallel workloads in Q and other networks.
Run
sudo vim /etc/sysctl.conf
Press i to start inserting text in the /etc/sysctl.conf file
Scroll to the end of the file and insert the following content on a new line at the end:
# Increase buffer sizes for better network performance
net.core.rmem_max=600000000
net.core.wmem_max=600000000
Press esc to stop inserting text, enter :wq, and then press the enter key on the keyboard.
Run
sudo sysctl -p
Restart to apply the configuration
reboot
Deploy Quilibrium node#
Clone the Quilibrium CeremonyClient repository#
Run
cd ~
git clone https://github.com/QuilibriumNetwork/ceremonyclient.git
Enter the ceremonyclient/node folder
Note: All subsequent commands will be run in the node/ folder.
cd ceremonyclient/node
Import voucher hex (optional)#
Note: This section is only applicable to users with offline vouchers. If you do not have a voucher, skip this section.
Run:
sudo vim /root/voucher.hex
Press i to start inserting text in the voucher.hex file
Copy and paste the 228-character voucher hex into the file
Press esc to stop inserting text, enter :wq, and then press the enter key on the keyboard.
Run:
GOEXPERIMENT=arenas go run ./... -import-priv-key `cat /root/voucher.hex`
Take note of your Peer ID. The Peer ID may become your Q wallet in the future.
It will be the last line in the reply, starting with "Qm" and labeled with Peer ID.
Initialize Q wallet and .config folder#
Only applicable if you skipped the previous section because you do not have an offline voucher and you are installing a new Q node.
Run:
cd ~/ceremonyclient/node
GOEXPERIMENT=arenas go run ./...
Since this will trigger the Q node to start, what you really need now is to create the .config folder inside ~/ceremonyclient/node and create the config.yml and keys.yml files.
Once you see the logs generated, you can press ctl + c to pause the node.
Configure Linux firewall#
Run:
sudo ufw enable
Allow ports 22, 8336, 443 in order
sudo ufw allow 22
sudo ufw allow 8336
sudo ufw allow 443
Run:
sudo ufw status
The terminal will return
> To Action From
> -- ------ -----
> 22 ALLOW Anywhere
> 8336 ALLOW Anywhere
> 443 ALLOW Anywhere
> 22 (v6) ALLOW Anywhere (v6)
> 8336 (v6) ALLOW Anywhere (v6)
> 443 (v6) ALLOW Anywhere (v6)
Configure config.yml#
Enable gRPC to enable gRPC functional calls for the node#
Note: This interface is a read-only interface, unauthenticated, and not rate-limited. It is recommended to enable them only if access is properly controlled through a firewall or only queried through the local host (for example, if port 8337 is used for gRPC calls, it is better not to allow it in the firewall configuration later, and only trigger gRPC calls on the local host).
Enter the ceremonyclient/node folder:
cd ~/ceremonyclient/node
Run:
sudo vim .config/config.yml
Press i to start inserting text in the config.yml file
Replace the field listenGrpcMultiaddr: "" at the end of the file with
listenGrpcMultiaddr: /ip4/127.0.0.1/tcp/8337
Press esc to stop inserting text, enter :wq, and then press the enter key on the keyboard to exit.
Enable statistics data collection by selection#
Enter the ceremonyclient/node folder:
cd ~/ceremonyclient/node
Run:
sudo vim .config/config.yml
Press i to start inserting text in the config.yml file
In the middle of the file, there is a field engine, add a subfield named statsMultiaddr
engine:
statsMultiaddr: "/dns/stats.quilibrium.com/tcp/443"
Quick start node#
All commands will be run in the node/ folder.
cd ~/ceremonyclient/node
Start the node
GOEXPERIMENT=arenas go run ./...
View Peer ID
GOEXPERIMENT=arenas go run ./... -peer-id
Token balance
GOEXPERIMENT=arenas go run ./... -balance
Advanced configuration#
TBC